Flexible hose catalog

Stainless steel flexible hose EXAGAS for gaseous fuels: natural gas, LPG
Standard EN 14800 - Type Rht NBN EN 1775 - Comply for Belgian standard NBN D51-003
With Yellow protective sheath

Flexible hose Saniflex-AL for the connection of water meters, water softeners and pumps.

Plumbing & heater hose, all lengths on request

Stainless steel flexible hose INGAS for gaseous fuels: natural gas, LPG
Standard EN 14800 - Comply for Belgian standard NBN D51-003
Type Rht NBN EN 1775 - With grey protective cover

Reinforced stainless steel gas hose for gaseous fuels, such as natural gas, LPG
Standard EN 14800 - Compliant for the Netherlands - Gastec QA certificate
Equipped on each side with an M24 anti-twist swivel Female coupling with gasket.
For connecting fixed or mobile gas appliances such as stove tables, ovens and gas stoves.

Flexible duct for hot air
Temp.: -20°C à +100°C
Diameter: Ø 150 à 900 mm

Natural gas stainless steel hose with transition sleeve (female) ISO 7
Compliant with the technical specification of Belgian ARGB 91/01
Resistant to high temperature (type Rht) - Certificate KBGV C-18-3792-A
According to the norm NBN D51-003 (pressure <200mbar - MOP inside buildings: 100 mbar)

Rubber expansion joint for axial, lateral and angular movements, with loose flanges
Choice between different elastomers: EPDM, NEOPRENE, NITRILE, HYPALON, VITON
From DN25 (1'') to DN300 (12'')
Length: 130mm

Electrically conductive PE film hose Ro ≤ 10^6 Ω for air intake and transport.
Made of polyethylene (PE) fibre with a PE coating on both sides.
Set with a galvanized steel spiral band.
Very flexible, lightweight and highly compressible (1:6).
Surface resistance Ro ≤ 10^4 Ω
Temperatures from -20 °C to +70 °C.
Suitable for the extraction of chemical vapours.

Food grade flexible hose made of transparent PVC reinforced with a textile braid.
Operating pressure at 20°C = 15 bar < 35 mm int. / 12 bar < 32 mm int. / 10 bar < 40 mm int. / 8 bar < 50 mm int.
Tolerances from +/- 0.2 mm to +/- 0.5 mm depending on the diameter.
50 meter roll

Hose clamp W1 - Screw: 8.8 grade steel, white zinc-plated - Band, Bridge, Washer and Trunions: Mild steel white zinc-plated

Hose clamp W4 - Band and Bridge: X5CrNI 1810 Stainless steel (DIN 1.4301) (AISI-304) (A2) - Bolt: (AISI-302) Cu Stainless steel

Abrasion-resistant synthetic rubber hose NBR, flat-rolled, resistant to atmospheric, chemical and hydrocarbon agents.
Working pressure: 15 bar / 220 psi
Temperature from -20°C to +80°C with short peaks at 150°C.
Complies with NFS 71-112 standard for fire.
Used for water backflow, sewage, waste water, also in industry, mining, shipbuilding.

Polycarbonate switch boxes.
Specifications:
- Housing with closing screws
- Grey or transparent cover
- Protection class IP68 and impact resistance IK08 PC
- Temperature: -40°C to +85°C

Plumbing & heater hose, all lengths on request

Robust and liquid tight.
IP68 acc. to EN/IEC 60529
Temp.: approx. -20°C to +70°C (peak +80°C)
Colour: grey

Groundwater sampling flexible hose in polyethylene (LD-PE).
- Detection of soil pollution
- Determination of the level of contamination
Available in different diameters.

Cable Glands
Material: Polyamid (PA)
Sealing ring: SBR
Temperature Range: -20°C / 80°C
Protection type: IP 54
Color: Grey
Thread M12x1,5 to M63x1,5 for cables from Ø6mm to Ø47mm

Cable Glands
Material: Polyamid (PA)
Sealing ring: SBR
Temperature Range: -20°C / 80°C
Protection type: IP 54
Color: Grey
Thread PG7 to PG48 for cables from Ø3,5mm to Ø42mm