Flexible hose catalog

Indumat composite hose PP SS according to EN 13765 – general use chemical hose suitable for the suction and the delivery of a wide variety of acids, bases, solvents and petroleum products.
Coating and strengthening in PP
Inside and outside helix in stainless steel
Temperature: -30 °C to +80 °C
Dimensions: DN25 to DN200
Assembly option with brass or stainless steel fittings

SS AISI316L or AISI321 flexible hose with SS AISI304 braid with flange (loose or fixed). TIG welded stainless steel fittings.

Flexible metal hose AISI316L and braid AISI304
TIG welded stainless steel fittings

Flexible metal hose AISI316L and braid AISI304
TIG welded stainless steel fittings

Rubber flexible hose for delivery of domestic oils and fuels. Appropriate for applications on reel.
Hose made of NBR, good resistance against oil and atmospheric agents.

SS AISI316L flexible hose with SS AISI304 braid.
TIG welded stainless steel fittings

PTFE flexible hose reinforced with Stainless steel braid

Stainless steel flexible hose AISI316L with stainless steel braid AISI304.
TIG welded stainless steel fittings.
Possibilities: loose nut (conical/flat joint), union 3 pieces (male/female), loose flange, male, smooth end, rigid flange, ...

SS AISI316L flexible hose with SS AISI304 braid.
TIG welded stainless steel fittings

Abrasion-resistant synthetic rubber hose NBR, flat-rolled, resistant to atmospheric, chemical and hydrocarbon agents.
Working pressure: 15 bar / 220 psi
Temperature from -20°C to +80°C with short peaks at 150°C.
Complies with NFS 71-112 standard for fire.
Used for water backflow, sewage, waste water, also in industry, mining, shipbuilding.

Groundwater sampling flexible hose in polyethylene (LD-PE).
- Detection of soil pollution
- Determination of the level of contamination
Available in different diameters.

Working Pressure (WP) at 23°C: 4 Bar
Security coefficient at 20°C: 3 times the WP
Vacuum: 5
Temperature: -10°C to +60°C

Plasticized PVC hose reinforced by a rigid PVC spiral (anti shock). Smooth inner layer in transparent crystal. Easy to use, light and flexible.
Temperature range: -10 till 60°C
Applications: Suction and discharge hose for e.g. agriculture, pumps

Plasticized super elastic PVC hose reinforced by a rigid PVC spiral (anti shock). Smooth inner layer. Easy to use even at low temperatures
Temperature range: -20 till 60°C
Applications: Suction and discharge for used water, especially as equipment for trucks.

Flexible hose in opaline PVC for suction and discharge
Plasticised PVC hose reinforced by a rigid PVC spiral
Temperature: -10°C to +60°C
Smooth inner layer in transparent crystal with food quality

Versatile professional reinforced EPDM water hose for use in industry, construction, ...

Temperature: -20°C to +100°C
Operating pressure up to 15 bar, burst pressure of 45 bar
Packing: 40m roll

INDUMAT AIRCORD YELLOW
Compressed air hose resistant to oil mist. Also for industrial water.
Inner tube: SBR smooth black
Reinforcement: textile yarn
Cover: SBR/EPDM yellow (fabric appearance), UV and aging-resistant
Temperature: -20°C to +70°C
Working pressure: 20 Bar
Bursting pressure: 60 Bar
Diameters: 32, 38, 51, 63, 76mm
Possibility of assemblages.

INDUMAT AICORD DIN 20018
Compressed air hose resistant to oil mist. Also for industrial water.
Inner tube: SBR smooth black
Reinforcement: textile yarn
Cover: SBR black (fabric appearance), UV and aging-resistant
Temperature: -30°C to +50°C
Working pressure: 10 Bar
Bursting pressure: 40 Bar
Diameters: 32, 35, 42, 53, 76mm
Also available in diameter 38mm and 51mm but not according to DIN.
Possibility of assemblages.

Flexible hose for installations with heating water - EPDM hose with braided galvanized steel