Flexible hose catalog

Material: Polyamide PA 6
Application range: Ø 4mm to Ø80mm
Colour: black
Protection degree: IP 40 acc. to EN/ IEC 60529
Temp.: -40 °C to +120 °C approx.
Applications:
For cable bunching, mechanical protection against abrasion, for electrical installations and highly flexible applications, for aerospace and railway construction
Properties:
good protection against abrasion
easy retraction of cables
variable inner diameter
highly flexible
good resistance to mineral oils and grease
good resistance to alkalis and acids
good resistance to chemicals
good resistance to UV and ozone
small bending radius
free of softener and halogen
light weight
axially flexible
approved to FMVSS 302 and DIN 75200 (selfextinguishing)

Flexible duct for hot air
Temp.: -20°C à +100°C
Diameter: Ø 150 à 900 mm

Light, very flexible suction and blower hose in PVC coated polyester fabric. Highly compressible to about 1:8. Suitable for danger zones which require electro-conductivity acc. to TRBS, the suction and conveyance of aggressive media, explosive gases and fumes and the supply and extraction of air in explosion-protected Areas.

PTFE sealing cord

PTFE seal tape 12mm x 12m x 0,1mm

AEROCLIMA® CLIP EXH C300 - 54286
Hot air hose for high temperatures, designed for the suction or conveying of hot air up to +300 °C, equipped with an external galvanized steel clamping spiral and reinforced insulation.
Featuring reinforced insulation composed of multiple layers of glass felt, covered with a silicone-coated glass fabric outer layer and stitched with glass yarn.
Temperature range: -120°C to +300°C.
Properties: hardly inflammable, highly heat resistant, flexible and compressible up to 1:6, limited vibration resistance.
Application: extraction of hot gases, vapours and exhaust fumes with improved thermal insulation. Particularly suitable for the safe and efficient evacuation of exhaust gases from generators and power units.