Flexible hose catalog

Light, robust and very flexible exhaust hose in special coated glass fabric, with small bending radius. Highly compressible to approx. 1:6. Suitable for extractor units and production in the aircraft, machinery, military and automotive sectors.

Light, very flexible suction and blower hose in PVC coated polyester fabric. Highly compressible to about 1:8. Suitable for danger zones which require electro-conductivity acc. to TRBS, the suction and conveyance of aggressive media, explosive gases and fumes and the supply and extraction of air in explosion-protected Areas.

Flexible suction air hose, light and gas-tight, with internal Kapton® layer and coated glass fibre fabric. Small bending radius and highly compressible 1:4. Suitable for air exhaust systems in the extraction of corrosive media. DuPont™ Kapton® polyimide films for heat insulation.

Light, very flexible suction hose in Teflon® coated glass fabric, with galvanised steel spiral. Suitable for the paint, paper, pharmaceutical and chemical industries and the extraction of corrosive media, solvents and paint mist.

Light, very flexible suction hose in Viton® coated polyester fabric. Suitable for the paint, paper, pharmaceutical and chemical industries and the extraction of corrosive media, solvents and paint mist.

Light, very flexible suction hose, suitable for the paint, wood, paper, pharmaceutical and chemical industries and the extraction of corrosive media, solvents and paint mist. Inner ply in Teflon® film, outer ply in Hypalon® coated polyester fabric, with galvanised steel spiral.

M 8 x 1,25
M 10 x 1,5 / Pg7
M 12 x 1,5 / Pg9
M 16 x 1,5 / Pg11
M 20 x 1,5 / Pg13,5
M 25 x 1,5 / Pg16
M 32 x 1,5 / Pg21
M 40 x 1,5 / Pg29
M 50 x 1,5 / Pg36
M 63 x 1,5

M 8 x 1,25
M 10 x 1,5
M 12 x 1,5
M 16 x 1,5
M 20 x 1,5
M 25 x 1,5
M 32 x 1,5
M 40 x 1,5
M 50 x 1,5
M 63 x 1,5

Plumbing & heater hose, all lengths on request

Rubber expansion joint for axial, lateral and angular movements, with union couplings
Choice between different elastomers: EPDM, NEOPRENE, NITRILE
From DN20 (3/4'') to DN80 (3'')

Rubber expansion joint for axial, lateral and angular movements, with loose flanges
Choice between different elastomers: EPDM, NEOPRENE, NITRILE, HYPALON, VITON
From DN25 (1'') to DN750 (30'')
Length: 152mm (DN25 to DN200), 203mm (DN250 to DN500), 254mm (DN550 to DN750)

Light, very flexible suction hose with small bending radius and Hypalon® coated polyester fabric wall. Suitable for air conditioning, vantilation and heating systems, vehicle and engine construction and extraction of corrosive media.

INDUMAT PP SS COMPOSITE BS / EN 13765 – general use chemical hose suitable for the suction and the delivery of a wide variety of acids, bases, solvents and petroleum products.
Coating and strengthening in PP
Inside and outside helix in stainless steel
Temperature: -30 °C to +80 °C
Dimensions: DN25 to DN200
Assembly option with brass or stainless steel fittings

PTFE flexible hose reinforced with Stainless steel braid

Working Pressure (WP) at 23°C: 4 Bar
Security coefficient at 20°C: 3 times the WP
Vacuum: 5
Temperature: -10°C to +60°C

Plasticized PVC hose reinforced by a rigid PVC spiral (anti shock). Smooth inner layer in transparent crystal. Easy to use, light and flexible.
Temperature range: -10 till 60°C
Applications: Suction and discharge hose for e.g. agriculture, pumps

Plasticized super elastic PVC hose reinforced by a rigid PVC spiral (anti shock). Smooth inner layer. Easy to use even at low temperatures
Temperature range: -20 till 60°C
Applications: Suction and discharge for used water, especially as equipment for trucks.

Flexible hose in opaline PVC for suction and discharge
Plasticised PVC hose reinforced by a rigid PVC spiral
Temperature: -10°C to +60°C
Smooth inner layer in transparent crystal with food quality

Stainless steel expansion joint with fixed flanges and inner guide tube for axial movements.

Stainless steel expansion joint for axial movements, with inner guide tube & welding connection.